Cyberbond Additional Products

Additional Items Image

Cyberbond Activator Liquid

Accelerates the polymerisation of Cyanoacrylate adhesives.

CB 9090 Activators (base: acetone / heptane mixture) and CB 9096 (base: heptane) accelerate the polymerization of Cyanoacrylate Adhesives. The use of Cyberbond Activators is necessary when there are:

- Adverse environmental conditions (dry air, cold),

- Bigger gaps that need bridging,

- Inactive materials involved (does not replace Cyberbond Primer 9056).

CB Activator can be applied in two different ways:

- Pre-application: Apply activator to one side of the parts to be bonded and allow it to evaporate. Apply Cyberbond Cyanoacrylate Adhesive to the other mating part, assemble quickly and let the adhesive polymerize.

- Post application: This application is made possible by using a suitable spray valve. Spray a small amount of activator onto the surface of the remaining and non-cured adhesive and allow complete polymerization of the adhesive. To achieve a smooth adhesive surface, ensure CB Activator is sprayed from a suitable distance (approx 30 cm).

The product is available in:

200 & 400 ml spray can (Aerosol; no 9096)
500 ml
5 l container

500ml Bottle          5 ltr Container

Activator spray

Cyberbond Activator Spray

Accelerates the polymerisation of Cyanoacrylate adhesives.

CB 9090 Activators (base: acetone / heptane mixture) and CB 9096 (base: heptane) accelerate the polymerization of Cyanoacrylate Adhesives. The use of Cyberbond Activators is necessary when there are:

- Adverse environmental conditions (dry air, cold),

- Bigger gaps that need bridging,

- Inactive materials involved (does not replace Cyberbond Primer 9056).

CB Activator can be applied in two different ways:

- Pre-application: Apply activator to one side of the parts to be bonded and allow it to evaporate. Apply Cyberbond Cyanoacrylate Adhesive to the other mating part, assemble quickly and let the adhesive polymerize.

- Post application: This application is made possible by using a suitable spray valve. Spray a small amount of activator onto the surface of the remaining and non-cured adhesive and allow complete polymerization of the adhesive. To achieve a smooth adhesive surface, ensure CB Activator is sprayed from a suitable distance (approx 30 cm).

The product is available in:

200 & 400 ml spray can (Aerosol; no 9096)
500 ml
5 l container

200ml Spray          400ml Spray

Cleaner spray

Cyberbond Cleaner Spray

CB 9999 is an ozone friendly universal Cleaner for metals. Oil, grease and dirt quite often prevent perfect bonding and for this reason metal parts that have to be bonded should be cleaned and degreased. Simply apply CB 9999 on the dirty parts, allow the product to ‘work in’ briefly and then wipe it off. CB 9999 is also suitable for removing residues of adhesives and sealants. In addition to that it is also is a very good brake cleaner.

Quite often plastics are dissolved by solvent based cleaners. Therefore, before application of CB 9999 it is worth checking that the product is suitable for the process. It should not be applied on varnish or leather. One could use alcohol, acetone, and aliphatic hydrocarbons.

Supplied in a 500ml Spray.

500ml Spray

conditioner pen

Cyberbond Conditioner Pen

Cyberbond offers a Primer/Activator combination in a felt pen. Simply apply the conditioner before the use of cyanoacrylates. The main advantages of these felt pen conditioners are, that you clean the surface when using the pen and that these pens are not considered as dangerous goods, according to the European Chemical Law. These pens can even be transported by air without restrictions.
There is no Material Safety Data Sheet necessary for this product!

The conditioner pen accelerates the polymerization of Cyanoacrylate Adhesives. It optimizes bonding when there are:

- adverse environmental conditions (dry air, cold),

- bigger gaps that need bridging

- inactive materials involved

The conditioner pen enables the bonding of unpolare materials such as Polyethylene (PE), Polypropylene (PP), Polyoxymethylene (POM), Silicone as well as modern Thermoplastic Elastomere (TPE) when using Cyberbond Cyanoacrylate Adhesives.

There is also no need of a Material Safety Data Sheet!

Conditioner pen

9060

Cyberbond D-Bonder

Removes and dissolves cyanoacrylate adhesives.

CB 9060/9065 dissolves and removes Cyanoacrylate Adhesives. Chemically speaking CB 9060/9065 is an organic ester. In contrast to traditional solvents the product is notable for its almost non-combustibility (flashpoint 123°C). CB 9060/9065 is especially suitable for:

- dissolving and removing Cyanoacrylate Adhesive

 In addition to this CB 9060 is perfect for:

- cleaning of dosing equipment, with the advantage that it does not leave any condensation, moisture inside the system. Cyberbond D-Bonder prevents possible pre-polymerization of the adhesive within the dosing system,

- cleaning of dosing tips, tools etc. that have been in contact with Cyanoacrylate Adhesives. The main component is the heterocyclic ketone.

Cyberbond 9065 is not suitable for cleaning dosing equipment or dosing needles!

The product is available in:

20ml user friendly soft bottles

50ml user friendly soft bottles

500ml user friendly soft bottles

5litre plastic container

20ml Bottle          50ml Bottle          500ml Bottle          5 ltr Plastic Container

Dosing tips

Cyberbond Dosing Tips

For some applications the standard nozzle is not really optimal. This is especially the case, when just a very small amount of glue has to be applied. For this reason we offer Dosing Tips which are just put onto the nozzle of the CA bottle. After usage you keep the Dosing Tip on the nozzle so that the very top can polymerise. Then the bottle is “closed”. When you want to use the CA again, just cut off the polymerised top and start to apply.

We offer 2 sizes:

- LINOP DT “s“ for small (Diameter: 0,5 mm, length: 41,6 mm),

- LINOP DT “m“ for medium (Diameter: 1,0 mm, length: 41,6 mm).

0.5mm Dosing Tip          1.0mm Dosing Tip

primer

Cyberbond Primer

CB 9056 enables the bonding of unpolare materials such as Polyethylene (PE), Polypropylene (PP), Polyoxymethylene (POM), Silicone as well as modern Thermoplastic Elastomere (TPE) when using Cyberbond Cyanoacrylate Adhesive. Cyberbond 9056 changes the substrate surface tension. The advantages are:

- high strength bonding of materials that could not be bonded before,

- a fast and very easy application,

- higher flexibility of materials to choose from,

Cyberbond 9056 is simply brushed on to the mating parts and immediately after evaporation the application of Cyberbond Cyanoacrylate adhesives can start. Also, if required the parts can be temporarily stored for 24 h after applying 9056. The product is based on heptane.

Also available in brush or dropper formulation.

The product is available in:

10 ml blue glass bottle (brush (white) or dropper (black))
500 ml plastic bottle
5 l container

10ml Brush          10ml Dropper           500ml Bottle          5 ltr Container

 

logo for bottom of page